30e10abaffc1487ea7a654e1df674ff0
en-GB
Frustrating Experience — Would Not Recommend for Land Rover Repairs I took my Land Rover to this garage to have the XYZ switch replaced with a second-hand part. They fitted it but told me it wouldn’t go through the gears in Drive — only in 3 — and still let me drive away. I agreed to have the original switch reconditioned, which cost £90, and returned with it after barely driving the car. When I brought the reconditioned switch back, they claimed the one they had changed it to had “reset” and was now working fine in D. I collected the car, but the next day it started jumping out of Drive again. I returned it and asked them to fit the reconditioned switch. I called Tuesday afternoon and was told it wasn’t ready — they’d found oil everywhere and claimed there were other issues at the front of the car. I reminded them I’m not a mechanic and asked them to sort it. Later they said the XYZ switch wasn’t working and the car wouldn’t start. I offered to contact the company that reconditioned the part, as it was under warranty. While I was doing that, I arrived to find my car parked at the side of the garage. They told me they’d refitted the old switch to make space for another customer’s car. They said they’d spoken to the reconditioning company and were expecting data the next day. (I sent Dave the information sheet via whats app with the information on putting the xyz switch back in that night.) Then came a long list of supposed faults: - Ball joint fallen out (my cousin had fitted it securely with an extra nut due to it world just spin to be ) - Split driveshaft boot which the said b joint did ( ball joint nowhere near the joint and it would be grease not oil) - Broken ABS lead trapped behind the caliper - Loose driveshaft bolt (previously tightened with a scaffold bar on strong bar and two big lads ) - Loose wheel hub bolts (we’d used Loctite) - Missing caliper bolt (we never touched the caliper) My cousin, who did the work, confirmed none of these issues were present before. If they had been, I would’ve felt them while driving — and when you think of it so would you Simon, you drove the car yourself prior to this. The next day, a young mechanic called to say they’d fitted the XYZ switch but the car wouldn’t move. They suspected low gearbox oil or internal flaps. I explained the gearbox had worked fine before — it just showed a flashing “M” now and then so we were advised to clean the XYZ switch. I told him your were the last ones to service the gearbox. He said, “So you’re blaming us?” I replied, “You’re the only ones who’ve touched it.” He said he’d only been there three months and would check with the office but he was their when it came in for gear box service. ( with all this it means they must of not put the xyz switch in properly the first time) When I finally got the car back on Thursday, the bill was £90 for parts and £350 for labour if they was to add vat on the labour it would have been £440. Simon is a lovely man — but unfortunately, he’s not the one doing the work. If you value your Land Rover, I’d recommend going elsewhere. The mechanics here seem more interested in inventing problems than solving them they don't even know have to put a xyz switch on without the customer getting the reconditioner man to ring them and talk them through it. Here ill will give them some a free advise youtube it very good videos on how to do it. (And for the record, the XYZ switch is in the middle of the car near gearbox — nowhere near the front wheel.) https://youtu.be/YxUqHA4hx5I?si=653O1smsntc1pXlj https://youtu.be/XRrj_bL3O9k?si=8oXqR6wLYsfQOuRh